MEDIfraction – CO2 Fractional Laser
MEDIfraction targets the water in the skin tissue, generates a certain amount of hot stripped energy. The heating effect makes collagen contracted. The hot solidification and hot stripped energy forms minimally invasive puncture about 0.10 mm in diameter, about 2-4 mm in depth, then the thermal bridge is produced between traumatic holes. Thus starts the skin wound repair mechanism, a lot of new collagen is produced, then the frame structure of derma is reconstructed, facial contour sculpture, and wrinkles disappear, the skin become delicate, the acne and scar is smoothed.
MEDIfraction utilises laser energy microbeams to penetrate and break down skin tissue through the epidermis.
The laser beam will target into the dermis and create tiny wounds throughout that particular area without damaging the tissues in the surrounding parts.
Your body will naturally heal and during the process, creates new, healthy tissue to repl ce the affected areas that have undergone treatment. Scars should be of a lighter colour and your skin texture will be more even, leaving no visible wounds and allows you to apply make-up immediately following the procedure.
1. 70W HIGH-POWER LASER DRIVER: 70w high-power RF tube laser driver from Coherent Inc. USA. High power, stable output, long life, 30.000 hours warranty.
2. SEVEN JOINT LASER ARM: Imported from Korealab Inc., South Korea. Stable output, small light loss during the output process, and uniform light energy.
3. TWO SURGICAL TREATMENT HEADS: Two surgical treatment heads with spot size of 50mm and 100mm, which are convenient for treatment of different treatment areas.
4. NANO SENSOR MOTOR: We adopted nano sensor motor from Cambridge Co., USA displaying more than 3000 scanner modes more accurately and faster.
5. INTELLIGENT OPERATING SYSTEM: The machine is equipped with 3 operating modes, namely Fractional Mode, Normal Mode, and Scan-Fractional Mode. The Fractional Mode is equipped with treatment parameters of 7 common treatment items. The operator only needs to select the corresponding treatment item to start the treatment. The Normal Mode is specially designed with cutting, thus convenient for surgical treatment. The Scan-Fractional Mode adopts in-motion treatment method, which greatly shortens the treatment time of full face resurfacing.
6. GYNAECOLOGY HANDPIECES (OPTIONAL): DERMALUX causes a controlled and highly precise photothermal effect into the vaginal mucosa, promoting tissue contraction and tightening and returning its natural elasticity to the vaginal canal. The laser energy delivered along the vaginal wall heats the tissue without damaging it and stimulating the production of new collagen in the endopelvic fascia.
Type: CO2 laser device imported from Coherent, USA.
Wave Length: 10600 nm
Power: 40 W
Working Mode: Continuous
Output Power After Controlling System: Ultrapulse, impulse, lattice
Working Model of Lattice: Interval, continuous operation
Spot Mode: Single
The Diameter of Spot: 100um-2000um (adjusted by zoom lens barrel)
Pulse Width: 1ms-100ms
Output Pattern: Triangle, square, rectangle, hexagon, circle, straight line, even DIY figure
Power of Aiming Beam: ≤5mw
Guiding Light System: 7 joints arm
Wave Length of Aiming Beam: 650 nm
The Amount of Spot: (square) 625point (25×25 biggest)
Stripping Ratio: (lattice pattern) 1%-100%
The Size: 0.1mm×0.1cm － 20mm×20mm
Scanning Mode: Sequence, halve, out of order scanning
Pulse Interval: 1ms-100ms (stepping to 1ms)
Voltage: AC 220V±10%、50Hz; AC 110V±10%、60Hz
Cooling System: Air cooling + water
Insurance Specifications: Max 10A
Input Power: 1000W
Weight: 45kg
Order Enquiry Form
Contact form description text
RELATED PRODUCTS
About us
PT. PHARMINDO RIMPANG KOKOH (Pariko) is established since 1993. read more...
Warning: count(): Parameter must be an array or an object that implements Countable in /home/u1007243/public_html/pariko-ina.com/wp-includes/class-wp-comment-query.php on line 399